Using The Web Browser Interface - Cisco Aironet 1130AG Quick Start Manual

3. Press and hold the MODE button while you reconnect power to the
access point.
4. Continue pressing the MODE button until the Ethernet LED turns amber.
(approximately 2 to 3 seconds). Then release the button.
5. After the access point reboots, you must reconfigure it using the web
browser interface, the Telnet interface, or the access point console port.

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access
point settings to factory defaults using the web browser interface:
1. Open your Internet browser. You must use Microsoft Explorer (version
5.x or later) or Netscape Navigator (version 4.x or later).
2. Enter the access point IP address in the browser address line, and press
Enter. An Enter Network Password screen appears.
3. Enter the username Cisco in the User Name field.
4. Enter the password Cisco in the Password field and press Enter. The
Summary Status page appears.
5. Click System Software. The System Software screen appears.
6. Click System Configuration. The System Configuration screen
appears.
44
78-15955-02