Appendix; Error And Event Messages - Cisco Aironet 1100 Series Installation And Configuration Manual

Error and Event Messages

This appendix lists the CLI error and event messages.
an explanation and recommended action for each message.
Table H-1 Error and Event Messages
Message
Software Auto Upgrade Messages
SW_AUTO_UPGRADE-FATAL:
Attempt to upgrade software failed,
software on flash may be deleted. Please
copy software into flash.
SW_AUTO_UPGRADE-7-FAILURE:
dhcp_client_start_stop failed
SW_AUTO_UPGRADE-7-FAILURE:
Failed to obtain ip addr from dhcp server
SW_AUTO_UPGRADE-7-FAILURE:
boot_file_pathent creation failed
Association Management Messages
DOT11-3-BADSTATE: [mac-address]
[chars] [chars] -> [chars]
DOT11-6-ASSOC: Interface [interface],
Station [char] [mac] Associated
DOT11-6-ADD: Interface [interface],
Station [mac] Associated to Parent
[mac]
OL-2851-01
Explanation
Auto upgrade of the software failed. The
software on the flash may be deleted.
Copy software into the flash.
Auto upgrade of the software failed due
to error in starting/stopping DHCP client
process.
Auto upgrade of the software failed.
Auto upgrade of the software failed due
to error in creation of pathent (internal
data structure).
802.11 Association and management uses
a table-driven state machine to keep track
and transition an Association through
various states. A state transition occurs
when an Association receives one of
many possible events. When this error
occurs, it means that an Association
received an event that it did not expect
while in this state.
A station associated to an access point.
A station associated to an access point.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
A P P E N D I X
Table H-1 lists the errors and events and provides
Recommended Action
Copy software before rebooting the
unit.
Copy the error message exactly as it
appears and report it to your technical
support representative.
Copy the error message exactly as it
appears and report it to your technical
support representative.
Copy the error message exactly as it
appears and report it to your technical
support representative.
The system can continue but may lose
the Association that generates this
error. Copy the message exactly as it
appears and report it to your technical
service representative.
None.
None.
H
H-1