Using The Web Browser Interface; Compliance Information - Cisco Aironet 521 Quick Start Manual

a521qsg.fmb Page 19 Monday, March 12, 2007 10:40 AM
D R A F T - C I S C O C O N F I D E N T I A L
5. After the access point reboots, you must reconfigure it using the web
browser interface, the Telnet interface, or the access point console port.

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access
point settings to factory defaults using the web browser interface:
TBD

Compliance Information

This equipment has been tested and found to comply with the European
Telecommunications Standard ETS 300.328. This standard covers Wideband
Data Transmission Systems referred to in CEPT recommendation T/R 10.01.
This type-accepted equipment is designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed in accordance with the instruction
manual, may cause harmful interference to radio communications.
19
Quick Start Guide Cisco Aironet 521 Access Points