Working With The Flash File System; Displaying Available File Systems - Cisco Aironet 1100 Series Installation And Configuration Manual

Working with the Flash File System

Working with the Flash File System
The Flash file system on your access point provides several commands to help you manage software
image and configuration files.
The Flash file system is a single Flash device on which you can store files. This Flash device is called
flash:.
This section contains this information:
•
•
•
•
•
•
•
•
•

Displaying Available File Systems

To display the available file systems on your access point, use the show file systems privileged EXEC
command as shown in this example:
ap# show file systems
File Systems:
*
Table 19-1
Table 19-1 show file systems Field Descriptions
Field Value
Size(b) Amount of memory in the file system in bytes.
Free(b) Amount of free memory in the file system in bytes.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
19-2
Displaying Available File Systems, page 19-2
Setting the Default File System, page 19-3
Displaying Information about Files on a File System, page 19-3
Changing Directories and Displaying the Working Directory, page 19-4
Creating and Removing Directories, page 19-4
Copying Files, page 19-5
Deleting Files, page 19-5
Creating, Displaying, and Extracting tar Files, page 19-6
Displaying the Contents of a File, page 19-8
Size(b) Free(b)
16128000 11118592
16128000 11118592
32768 26363
- -
- -
- -
- -
- -
- -
- -
lists field descriptions for the show file systems command.
Type Flags Prefixes
flash rw flash:
unknown rw zflash:
nvram rw nvram:
network rw tftp:
opaque rw null:
opaque rw system:
opaque ro xmodem:
opaque ro ymodem:
network rw rcp:
network rw ftp:
Chapter 19 Managing Firmware and Configurations
OL-2851-01