Using The Web Browser Interface - Cisco 1240AG Series Quick Start Manual

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access
point settings to factory defaults using the web browser interface:
1. Open your Internet browser. You must use Microsoft Explorer (version
5.x or later) or Netscape Navigator (version 4.x or later).
2. Enter the access point IP address in the browser address line, and press
Enter. An Enter Network Password screen appears.
3. Enter the username Cisco in the User Name field.
4. Enter the password Cisco in the Password field and press Enter. The
Summary Status page appears.
5. Click System Software. The System Software screen appears.
6. Click System Configuration. The System Configuration screen
appears.
7. Click the Reset to Defaults button.
Note
If the access point is configured with a static IP address, the IP
address does not change.
After the access point reboots, you must reconfigure it.
Quick Start Guide Cisco Aironet 1240AG Series Access Point
47