Cisco Aironet 1100 Series Installation And Configuration Manual page 134

Matching Access Point and Client Device Authentication Types
Table 10-2 Client and Access Point Security Settings (continued)
Security Feature
EAP-TLS authentication
If using ACU to
configure card
If using Windows XP
to configure card
EAP-MD5 authentication
If using ACU to
configure card
If using Windows XP
to configure card
PEAP authentication
If using ACU to
configure card
If using Windows XP
to configure card
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
10-10
Client Setting
Enable Host Based EAP and Use
Dynamic WEP Keys in ACU and
select Enable network access
control using IEEE 802.1X and
Smart Card or Other Certificate as
the EAP Type in Windows 2000
(with Service Pack 3) or
Windows XP
Select Enable network access
control using IEEE 802.1X and
Smart Card or other Certificate as
the EAP Type
Create a WEP key, enable Host
Based EAP, and enable Use Static
WEP Keys in ACU and select
Enable network access control
using IEEE 802.1X and
MD5-Challenge as the EAP Type
in Windows 2000 (with Service
Pack 3) or Windows XP
Select Enable network access
control using IEEE 802.1X and
MD5-Challenge as the EAP Type
Enable Host Based EAP and Use
Dynamic WEP Keys in ACU and
select Enable network access
control using IEEE 802.1X and
PEAP as the EAP Type in Windows
2000 (with Service Pack 3) or
Windows XP
Select Enable network access
control using IEEE 802.1X and
PEAP as the EAP Type
Chapter 10 Configuring Authentication Types
Access Point Setting
Set up and enable WEP and enable
EAP and Open authentication
Set up and enable WEP and enable
EAP and Open Authentication
Set up and enable WEP and enable
EAP and Open authentication
Set up and enable WEP and enable
EAP and Open Authentication
Set up and enable WEP and enable
EAP and Open authentication
Set up and enable WEP and enable
Require EAP and Open
Authentication
OL-2851-01