Using The Mode Button; Using The Web Browser Interface - Cisco Aironet 1130AG Series Hardware Installation Manual

OL-8369-04 OL-8369-04
Resetting to the Default Configuration Resetting to the Default Configuration

Using the MODE Button

Using the MODE Button
St Step ep 1 1
St Step ep 2 2
St Step ep 3 3
St Step ep 4 4
St Step ep 5 5

Using the Web Browser Interface

Using the Web Browser Interface
St Step ep 1 1
St Step ep 2 2
St Step ep 3 3
St Step ep 4 4
St Step ep 5 5
St Step ep 6 6
Follow these steps to delete the current configuration and return all access point settings to the factory Follow these steps to delete the current configuration and return all access point settings to the factory
defaults using the MODE button: defaults using the MODE button:
Open the access point cover (refer to the "Opening the Acc Open the access point cover (refer to the
Disconnect power (the power jack for external power or the Ethernet cable for in-line power) from the Disconnect power (the power jack for external power or the Ethernet cable for in-line power) from the
access point. access point.
Press and hold the MODE Press and hold the MODE button while you reconnect power to the access point. button while you reconnect power to the access point.
Hold the Hold the MODE MODE button until the Ethernet LED turns an amber color (approximately 2 to 3 seconds), and button until the Ethernet LED turns an amber color (approximately 2 to 3 seconds), and
release the button. release the button.
After the access point reboots, you must reconfigure the access po int by using the W After the access point reboots, you must reconfigure the access po
the Telnet interface, or Cisco IOS commands. the Telnet interface, or Cisco IOS commands.
Note Note The access point is configured with the factory default values including the IP address (set to The access point is configured with the factory default values including the IP address (set to
receive an IP address using DHCP). receive an IP address using DHCP).
Follow these steps to delete the current configuration and return all access point settings to the factory Follow these steps to delete the current configuration and return all access point settings to the factory
defaults using the web browser interface. defaults using the web browser interface.
Open your Internet browser. Open your Internet browser.
Note Note The access point web-browser interface is fully compatible with Microsoft Internet Explorer The access point web-browser interface is fully compatible with Microsoft Internet Explorer
version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98, version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98,
Windows 2000, and Solaris platforms. Windows 2000, and Solaris platforms.
Note Note When using the access point browser interface, you should disable your browser pop-up blocker. When using the access point browser interface, you should disable your browser pop-up blocker.
Enter the access point's IP address in the browser address line and press Enter Enter the access point's IP address in the browser address line and press
Password screen appears. Password screen appears.
Enter your username in the User Name field. Enter your username in the User Name field.
Enter the access point password in the Password field and press Enter Enter the access point password in the Password field and press
appears. appears.
Click Click System Software System Software and the System Software screen appears. and the System Software screen appears.
Click Click System Configuration System Configuration and the System Configuration screen appears.
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide Cisco Aironet 1130AG Series Access
Chapter 3 3 Chapter
"Opening the Access Point Cov
and the System Configuration screen appears.
Point Hardware Installation Guide
Troubleshooting Autonomous Troubleshooting Autonomous Access
ess Point Cover" sectio er" section on page n on page
int by using the Web browser interface, eb browser interface,
Enter. An Enter Network . An Enter Network
Enter. The Summary Status page . The Summary Status page
3-15 3-15
Access Points Points
2-11). ). 2-11