Scanning Timeout; Scanner Time-Out - CipherLab 1560 User Manual

1.7 SCANNING TIMEOUT

Specify the scanning time interval (1~254 sec.; 0= Disable) when the scan mode is set
to any of the following –
Laser mode
Auto Off mode
Auto Power Off mode
Aiming mode
Scanner Time-Out after 0~254 seconds (*10)
1) Read the label above to specify the time interval before the scan engine times out.
2) Read the "Decimal
scanner to automatically shut down after being idle for 15 seconds.
3) Read the "Validate" label on the same page to complete this setting.
Value" label on page 189. For example, read "1" and "5" for the
Chapter 1 Understanding the Barcode Scanner
Update
35