Prefix/Suffix Code - CipherLab 1560 User Manual

1560 Series Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
you will have the string
"Barcode_1234567890".
If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,
and Key Status
Key Status when "Normal Key" is selected for Key Type. Refer to
Table.
Key Type
Scan Code Up to 4 scan code values are allowed.
Normal Key Up to 8 character strings are allowed.
Default setting
Configure Prefix
1) Read the label above to apply prefix code or suffix code separately, and follow steps
2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" label to complete this setting.
136
User Guide
appear
will then become applicable. You may decide whether or not to apply
Value" label on page 190 for the desired character string. For
in front of the
Key Status
N/A
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Add Break
For example, read labels for [Add Shift],
[A], [Add Shift], and [B].
barcode read, like
Keyboard Wedge
Configure Suffix
Enter Setup
this –
Key Type