CipherLab 1560 User Manual page 196

1560 Series Barcode Scanner
Config<CR>
Purpose To configure 3656.
Remarks A list of the current settings will be displayed. Run HyperTerminal.exe on your
computer and change the settings one by one.
DefaultSetting<CR>
Purpose To restore the default settings.
Remarks
SingleConnection<CR>
Purpose To allow only one scanner connecting to 3656.
Remarks
MultiConnection<CR>
Purpose To allow up to seven scanners connecting to 3656.
Remarks
UseOnePortforAll<CR>
Purpose To use one Virtual COM port for all whenever connecting 3656 to PC via USB. This
setting requires you to connect one 3656 at a time, and will facilitate configuring a
great amount of 3656 via the same Virtual COM port (for administrators' or factory
use).
Remarks
184
User Guide
Enter Setup