Code 39; Start/Stop Transmission; Checksum Verification - CipherLab 1560 User Manual

Chapter 4 Changing Symbology Settings

4.5 CODE 39

*Enable Code 39
Disable Code 39

4.5.1 START/STOP TRANSMISSION

Decide whether or not to include the start/stop characters in the data being transmitted.
Transmit Code 39
Start/Stop Characters
*Do Not Transmit

4.5.2 CHECKSUM VERIFICATION

Decide whether or not to perform checksum verification when decoding barcodes.
If enabled and the checksum found incorrect, the barcode will not be accepted.
Verify Code 39 Checksum
*Do Not Verify
103
Update