CipherLab 1560 User Manual page 175

Field 4 Setting
1. Read the above label to divide field by a specified terminating string.
2. Read the "Hexadecimal
3. Read the "Validate" label to complete this setting.
4. Read the "Discard Separator" label if the field separator is not desired in the field.
*Include Separator
If not dividing the field by a specific separator, you may divide it by a specified length.
1. Read the above label to divide field by length.
2. Read the "Decimal
3. Read the "Validate" label on the same page to complete this setting.
Select Field Separator
to Divide Field 4 ...
Value" label on page 190 for the desired character string.
Divide Field 4 by Length ...
Value" label on page 189 for the desired field length.
Chapter 6 Applying Formats for Data Editing
Discard Separator
Update
163