Keyboard Wedge Via 3656; Activate Keyboard Wedge & Select Keyboard Type - CipherLab 1560 User Manual

2.3 KEYBOARD WEDGE VIA 3656

The Y cable allows you to connect the scanner via 3656 to the keyboard input port of PC
and you may join the keyboard as well. The scanned data will be transmitted to the host
keyboard port as if it is manually entered via the keyboard. For example, run a text
editor on your computer to receive the data.
Keyboard Wedge Settings
Keyboard Type
Alphabets Layout
Digits Layout
Capital Lock Type
Capital Lock State
Alphabets Transmission
Digits Transmission
Alternate Composing
Inter-Character Delay
Inter-Function Delay
Send "NR" to Host
Laptop Support
2.3.1 ACTIVATE KEYBOARD WEDGE & SELECT KEYBOARD TYPE
When Keyboard Wedge interface is activated, you will have to select a keyboard type to
complete this setting.
1) Read this label above to activate Keyboard Wedge and select a keyboard type.
2) Read the "Decimal
of desired keyboard type.
3) Read the "Validate" label on the same page to complete this setting.
Activate & Select Keyboard Type ...
Value" label on page 189. Refer to the table below for the number
Chapter 2
Defaults
PCAT (US)
Normal
Normal
Normal
Off
Case-sensitive
Alphanumeric keypad
No
0 (ms)
0 (ms)
Disable
Disable
Update
Selecting Output Interface
55