CipherLab 1560 User Manual page 95

Entering preset PIN code...
1. Read the "Use preset PIN" label to enable authentication with a preset PIN.
Use preset PIN
2. Read one of the labels to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to "0000". Maximum 16 characters are allowed.
Enter PIN Code
in Hexadecimal ...
3. Read the "Decimal
the desired digits or character string.
Read the "Clear PIN Code" label first if you need to re-input the PIN code.
Clear PIN Code
4. Read the "Validate" label to complete this setting.
Value" label on page 189 or the
Chapter 3 Setting up a WPAN Connection
Enter PIN Code
in Decimal ...
"Hexadecimal Value" label on page 190 for
Update
83