CipherLab 1560 User Manual page 31

1) Read the label above to specify the time interval before the scanner automatically
turns off.
2) Read the "Decimal
scanner to automatically turn off after being idle for 15 minutes.
3) Read the "Validate" label on the same page to complete this setting.
Note: Auto Power Off will not take effect when one of the following conditions is met:
(1) the scanner is in the configuration mode, or
(2) 1560 is in Auto-Sense mode and seated in the Auto-Sense Stand.
1) Read the label above to specify the time interval before the scanner automatically
turns off.
2) Read the "Decimal
scanner to automatically turn off after being idle for 15 minutes.
3) Read the "Validate" label on the same page to complete this setting.
Note: Power-Saving will not take effect when one of the following conditions is met:
(1) the scanner has already established a BT HID/SPP connection,
(2) the scanner is in the configuration mode,
(3) the scan mode is set to Test, Continuous or Alternate Mode,
(4) 1560 is in Auto-Sense mode and seated in the Auto-Sense Stand, or
(5) the setting value of Power-Saving is greater than that of Auto Power Off.
Auto Off after 0~254 minutes (*10)
Value" label on page 189. For example, read "1" and "5" for the
Power-Saving after 0~254 minutes (*2)
Value" label on page 189. For example, read "1" and "5" for the
Chapter 1 Understanding the Barcode Scanner
Update
19