Bt Spp; Activate Bt Spp; Inter-Function Delay - CipherLab 1560 User Manual

2.2 BT SPP

For BT SPP, refer to
settings. For example, run HyperTerminal.exe on your computer, and the scanned data
will be transmitted to the computer.

2.2.1 ACTIVATE BT SPP

2.2.2 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254,
to match the computer response time of the keyboard interface. Such delay time is
inserted between every function code (0x01 ~ 0x1F) being transmitted. The longer the
delay time is, the slower the transmission speed will be.
Value Delay Time
0 Disable
1 ~ 14 10 millisecond
15 ~ 24 20 millisecond
25 ~ 34 30 millisecond
35 ~ 44 40 millisecond
45 ~ 54 50 millisecond
... ...
1) Read the label above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" label on the same page to complete this setting.
Chapter 3 – Setting up a WPAN Connection
Activate B SPP
Inter-Function Delay ... (*0 ~ 254)
Value" label on page 189 for the desired inter-function delay
Chapter 2
Value Delay Time
195 ~ 204 200 millisecond
205 ~ 214 210 millisecond
215 ~ 224 220 millisecond
225 ~ 234 230 millisecond
235 ~ 244 240 millisecond
245 ~ 254 250 millisecond
Update
Selecting Output Interface
for related connection
53