Inter-Character Delay; Inter-Function Delay - CipherLab 1560 User Manual

1560 Series Barcode Scanner
Data Ready

2.4.7 INTER-CHARACTER DELAY

By default, the inter-character delay is zero. Specify a value, ranging from 0 to 254 in
units of millisecond, to match the computer response time. Such delay time is inserted
between every character being transmitted. The longer the delay time is, the slower the
transmission speed will be.
1) Read the label above to specify the inter-character delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" label on the same page to complete this setting.

2.4.8 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254
in units of millisecond, to match the computer response time of the keyboard interface.
Such delay time is inserted between every function code (0x01 ~ 0x1F) being
transmitted. The longer the delay time is, the slower the transmission speed will be.
1) Read this label above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" label on the same page to complete this setting.
66
User Guide
Inter-Character Delay ... (*0 ~ 254)
Value" label on page 189 for the desired inter-character delay
Inter-Function Delay ... (*0 ~ 254)
Value" label on page 189 for the desired inter-function delay
Invert Data Ready
Enter Setup