Reset Connection - CipherLab 1560 User Manual

BT HID
By default, the keyboard type is set to PCAT (US). The following keyboard types are supported for
BT HID or USB HID when using 3656 with the USB cable provided —
No. Keyboard Type
64 PCAT (US)
65 PCAT (French)
66 PCAT (German)
67 PCAT (Italy)
68 PCAT (Swedish)
69 PCAT (Norwegian)

2.1.2 RESET CONNECTION

For BT HID, you can only have the scanner connected to one computer at a time. If you
want to connect the scanner to another host, you must have it read the "Reset
Connection" label so that the current connection record will be cleared. Then, the scanner
will restart itself automatically. Go through the whole process in
to establish a new connection.
Note: The "Restore System Defaults" label will have the current connection record
cleared as well.
No. Keyboard Type
70 PCAT (UK)
71 PCAT (Belgium)
72 PCAT (Spanish)
73 PCAT (Portuguese)
74 PS55 A01-2 (Japanese)
75 User-defined table
Reset Connection
Chapter 2 Selecting Output Interface
3.2.3 Connect to Dongle
Update
47