Table of Contents
Advertisement
Position of the Lifting Arms
Collection Mode
To correctly position the arms between two pick-ups:
Raise the arms until they rest on the rubber bump stops.
1.
Retract the forks fully.
2.
Figure 4-5
Arms correctly positioned
En Route
Consult with your supervisor for specific rules of driving the front loader in your location.
Please remember the following important points:
The tailgate MUST be fully closed with tailgate safety pins in locking position.
Obey speed restrictions and regulations if driving from the right-hand side.
Overheight Caution
In some locations, the front loader may be overheight when the arms are in the full up travel position.
Consult local regulations or confer with your supervisor if unsure.
: Before passing under an overpass, be aware of the required clearance.
N
OTE
Units when not in Collection Mode
To correctly position the arms, do the following:
Raise the arms until they rest on the rubber bump stops (see Figure 4-6).
1.
Forks fully
retracted
Bump stop
Operating the W
P
ITTKE
ENDULUM
™ 79
Advertisement
Table of Contents
