Wittke Pendulum Operator's Manual page 54

44 Controls and Indicators
Table 1 Warning messages (cont'd)
Warning and Caution Messages
ESTOP:Cab Emergency Stop
ESTOP:Ext Emergency Stop
Fork:Arm Above MidHeight
Fork:Pump Not Started
High Hydraulic Oil Temp
J1939:Network NOT OK
Low Hydraulic Oil
Miss 1 Scan with Master
Packer:Arm Above MidHeight Lower Arms Below MidHeight
Packer:Extended Prox Timeout Check Full Extended Proximity
Packer:Pump Not Started
Packer:Retracted Prox Timeout Check Full Retracted Proximity
Packer:Roof Not Opened
Pump Stop:Main Air Pressure
Pump:Auto-Dump Button ON Call LabriePlus (Button Must
Pump:Aux EStop
Pump:Cab EStop
Pump:Deadman Switch ON
Pump:Ext EStop
Pump:Fork Width Decr. Switch
ON
Pump:Fork Width Incr. Switch
ON
Solution
Pull Up Cab EStop Button
Pull Up Ext EStop Button
Lower Arms Below MidHeight
Engage Pump
Turn Off Engine and Refer to
Maintenance Personnel
Call LabriePlus
Add Hydraulic Oil
Refer to Maintenance
Personnel or LabriePlus
Switch
Engage Pump
Switch
Open Roof (Top Door)
Let the Air Build Up to
Required Pressure
be OFF to Engage Pump)
Pull Up Aux EStop Button
Pull Up Cab EStop Button
Call LabriePlus (Switch Must
be OFF to Engage Pump)
Pull Up Ext EStop Button
Call LabriePlus (Switch Must
be OFF to Engage Pump)
Call LabriePlus (Switch Must
be OFF to Engage Pump)