Shut-Down Procedure - Wittke Pendulum Operator's Manual

Table of Contents

Advertisement

90 Operating the W
P
ITTKE
Figure 4-8
Canopy sweeper

Shut-Down Procedure

To shut down your W
Park the vehicle on solid, level ground.
1.
Set the parking brake.
2.
Ensure all hydraulic cylinders are collapsed (arms and forks up, tailgate closed, top door closed,
3.
pendulum packer at "home" position).
Turn off the optional auto-neutral feature, if you were using the right-hand side driving position.
4.
Turn off the hydraulic pump.
5.
The pump switch on the control panel will turn blue, indicating that the hydraulic system is
disabled.
Turn off all lights (work lights, strobe light, etc.).
6.
Shut the unit off following the chassis manufacturer's recommendations.
7.
Drain air from all air tanks.
8.
Turn off the master switch (see Figure 4-9).
9.
ENDULUM
P
ITTKE
ENDULUM
™ unit, do the following:

Advertisement

Table of Contents
loading

Table of Contents