Table of Contents
Advertisement
48 Controls and Indicators
Figure 3-4
Example of a possible cause
: If the system detects a problem, a beep will sound and a message will appear on the display
N
OTE
monitor.
: To go back to the Main page or the Main Menu, press "Esc" as many times as necessary until
N
OTE
the desired page is displayed.
Hydraulic Oil Temperature Indicator (optional)
This optional indicator, when provided, shows you the current hydraulic oil temperature. This
indicator is found on the upper right-hand side corner of the screen.
Time and Date Indicator
A time and date indicator may be found on the upper left-hand side corner of the screen. The
availability of this indicator is based on the chassis on which the body is mounted. If the chassis
provides real-time clock information through the J1939 bus, time and date will appear on the screen.
To set the Time and Date indicator, go to the Main Menu and choose Time Adjust.
Main Menu
To access the Main Menu, press the far left button when the Main page is displayed.
When the Main Menu is displayed, you can have access to the following sections:
Multicycle
I/O Status
Program Version
Pump Usage (optional)
Auto-Dump (optional)
Time Adjust (available according to chassis)
Advertisement
Table of Contents
