Mirror Light Switch (Optional); Canopy Light Switch (Optional); Strobe Light Switch (Optional); Work Light Switch (Optional) - Wittke Pendulum Operator's Manual

Table of Contents

Advertisement

Mirror Light Switch (optional)

This switch (see Figure 3-16) turns on/off the light installed above the left-hand side rearview mirror.
Press the switch once to turn on the mirror light (switch turns green).
Press the switch again to turn off the mirror light (switch turns blue).
Figure 3-20
Mirror light

Canopy Light Switch (optional)

This switch (see Figure 3-16) turns on/off the canopy light if installed on your vehicle.
Press the switch once to turn on the canopy light (switch turns green).
Press the switch again to turn off the canopy light (switch turns blue).

Strobe Light Switch (optional)

This switch (see Figure 3-17) turns on/off the strobe light if installed on your vehicle.
Press the switch once to turn on the strobe light (switch turns green).
Press the switch again to turn off the strobe light (switch turns blue).

Work Light Switch (optional)

This switch (see Figure 3-17) turns on/off work lights if installed on your vehicle.
Press the switch once to turn on work lights (switch turns green).
Press the switch again to turn off work lights (switch turns blue).

Auxiliary Control Power (optional)

Auxiliary controls, if installed on your unit, are located outside, directly behind the cab on the street
side (see Figure 3-21). To enable these controls, the operator must press the Auxiliary Control Power
switch on the control panel (see Figure 3-17).
A green switch means these controls are enabled.
A blue switch means these controls are disabled.
Controls and Indicators 61

Advertisement

Table of Contents
loading

Table of Contents