Table of Contents
Advertisement
36 Safety
Quick Reference Lockout Chart
Hopper door open
Pendulum packer not in "home"
position
Top door closed or not fully
open
Cleanliness
Clean all the lights and safety decals so you and the surrounding pedestrians and drivers will be aware
of the truck at all times.
Locking Out and Tagging Out the Vehicle
For any inspection, repair or general maintenance being done on the vehicle, whether on the road or
at the shop, it is the employer's responsibility to establish and see to the application of a proper
lockout and tagout procedure.
To lock out and tag out a W
Park the vehicle on safe, level ground, and apply the parking brake (see Figure 2-13).
1.
Figure 2-13
Parking brake sign
Make sure that the body is completely unloaded.
2.
Switch off the hydraulic pump.
3.
Turn off the engine, remove the key from the ignition, store it in a safe and controlled area
4.
(preferably on yourself), and tape over the ignition switch.
Turn off and lock the master switch.
5.
The battery set of the W
I
:
MPORTANT
must be turned off.
Pump circuit cut out - all controls
inoperative
Arms Up function will not operate
above cab windshield
Arms Up function will not operate
above cab windshield
P
™ vehicle:
ITTKE
ENDULUM
P
™ is equipped with a master switch (see Figure 2-14) that
ITTKE
ENDULUM
Advertisement
Table of Contents
