Table of Contents
Advertisement
92 Operating the W
P
ITTKE
Close the main valve on the hydraulic tank (see Figure 2-16).
4.
Carefully inspect and find the cause of the leak.
5.
Call the maintenance facility and report your findings.
6.
If the leak cannot be repaired on site, and the vehicle cannot be towed, remove the pump drive
7.
shaft before restarting the engine.
When it is time to restart the pump after repair, ensure that the valve on the hydraulic tank
8.
(see Figure 2-16) is fully open and that there is sufficient oil in the hydraulic tank.
™
ENDULUM
Advertisement
Table of Contents
