Table of Contents
Advertisement
Figure 1-4
Tailgate (left); Arms and forks (right)
In the cab, you will find the control panel, the monitor, the joystick, and all the switches that control
most of the truck's functions (see Figure 1-5).
Figure 1-5
W
P
ITTKE
ENDULUM
The W
P
ITTKE
ENDULUM
Body walls made up of 100% Hardox 450 steel delivering ultimate strength at the lowest possible
body weight
Hopper sides and floor made up of Hardox 400 steel
Tip-to-dump body
Arm lifiting capacity: 10,000 lbs
Packer is of Pendulum type
Hopper funnel has full front slope to avoid organic material stack up
Canopy has gutters to drive liquids into the hopper and not on the cab
Curbside covers giving access to Pendulum cylinders
Tip-to-dump cylinder maintenance trap on hopper front
Liquid tight hopper
Packer cylinders not exposed to organics
No debris behind the packer
™ cab
Control panel
™ comes with a series of key features:
Introduction 3
Arm
Forks
Advertisement
Table of Contents
