Shutting Down The Vehicle - Wittke Pendulum Operator's Manual

Figure 2-14 Master switch
Chock all wheels.
6.
Put an "O
7.
FF
Use safety props to block any system that could move by gravity (open tailgate, raised body, etc.).
8.
Drain all air tanks.
9.
Verify and inspect any security device and/or mechanism to make sure that there is no bypass
10.
and that they are all functional.

Shutting Down the Vehicle

If the vehicle has to be stored for an extended period of time, follow the chassis manufacturer's
shutdown and maintenance requirements.
Also:
Park the vehicle on a hard level surface, and apply the parking brake (see Figure 2-13).
1.
Make sure that all moving parts are in their home position (tailgate, arms, packer, etc.).
2.
Turn off, in sequence, the hydraulic pump (see Figure 2-17), the electrical system, the engine and
3.
the master switch (see Figure 2-14).
Drain all air tanks and water trap.
4.
S " tag on the driver's wheel and on the front windshield.
ERVICE
Safety 37