Table of Contents
Advertisement
Hydraulic Alarm Switch (optional)
The hydraulic alarm switch is located on the in-cab control panel (see Figure 3-17).
When this switch is engaged (green-lighted), the system continually monitors the temperature and
level of hydraulic oil. If the oil temperature gets too high or the level of hydraulic oil gets too low, the
hydraulic alarm switch will turn red, meaning that a correction must be applied quickly.
: This switch should always be engaged.
N
OTE
Packer Retracted Indicator Light
This indicator light is located on the in-cab control panel (see Figure 3-17).
If this indicator light is green, this indicates that the packer is completely retracted.
If this indicator light is red, this indicates that the packer is not completely retracted.
: The packer must be completely retracted to allow dumping into the hopper.
N
OTE
Hopper Door Open Indicator Light
This indicator light is located on the in-cab control panel (see Figure 3-16).
If this indicator light is green, this indicates that the hopper door is closed.
If this indicator light flashes red, this indicates that the hopper door is not closed.
: No hydraulic function is possible when the hopper door is not closed. In such a situation, the
N
OTE
pump switch on the control panel (see Figure 3-16) also flashes red.
Arms Not Stowed Indicator Light
This indicator light is located on the in-cab control panel (see Figure 3-16).
If this indicator light is green, this indicates that arms and forks are adequately stowed.
If this indicator light is red, this indicates that arms and forks are not adequately stowed.
I
:
Never drive this vehicle when this indicator light is red-lighted.
MPORTANT
In-Cab Packer Control Station
The W
P
ITTKE
ENDULUM
description of all three push-buttons that are on the packer control station.
™ has a packer control station located on the cab console. Here is a
Controls and Indicators 65
Advertisement
Table of Contents
