Maintenance; Xii.1 Daily Maintenance; Xii.1.1 Maintenance After Each Printing; Xii.1.2 Each 8 Hours - GRAPHTEC SignJet JS310 Series User Manuals

XII.1 Daily Maintenance
Daily maintenance is very important for normal workstation of the printer. Daily maintenance includes:
XII.1.1 Maintenance after each printing:
Erasure dried ink from Print head surface with flush solution;
Restore the jammed nozzles before next printing.
XII.1.2 Each 8 hours:
Oil the Print head rail and clean the dust from it once each 8 hours.
XII.1.3 Daily work:
Check filter and seep of the pump, clean it if necessary;
Check waste ink tank, cleanup if necessary;
Check the waste ink groove on the startup position and clean it if necessary;
Check the sponge on the wet-keeping frame, clean or replace it if necessary;
Clean feeding and take-up rollers with PM acetate. Skid on the rubber roller will cause error code
from service and impact print quality.
Do normal clean for the printer everyday.
XII.1.4 Weekly work:
Clean the dust on the surface of fans on dry board. Assemble them after ensure clearness of the
leafages.
Check pump route if there is any loose.
XII.1.5 Monthly work:
Clean the floaters in Sub-tanks;
Clean the filters of C,M,Y and K and flush solution;
Check 4 trilateral valves of positive pressure clean if there is any leak of ink. Clean them with
flush solution if necessary;
Check the tension of straps;
Clean dust in the power tank;
Oil the pumps.
XII.1.6 yearly work:
Replace ink filters;
Blower the dust on power tank with compress air;
Clean the main ink tank;
Clean the ink supply routes;
Clean the liquid pumps for ink supply;
Oil the gears of feeding and take-up motors;
Check whole circuit if there is any loosen or broken. Repair it in time if necessary;
Check if there is any tear on the tube and wire in the towline set and replace it if necessary.
SignJet JS310 Series User's Manuals
- 58 -
XII

Maintenance