Table of Contents
Advertisement
X.4
Working Process and Characteristics
1.
The temperature of front and Pre (Rear) heater is already set in the factory.
2.
Heating power supply is independent from control power supply. Please turn on the heating power
before turning on the power for the printer. Once the power is on, the system heats up automatically
to set temperature and keeps the temperature at the set value. Without turning on power for printer,
the heating system will not work. However, there is still AC 200-240V inside machine.
3.
Temperature detector lies about 50cm to the right physical printing original position. Print media
should cover this region when printing.
4.
After printing, make sure to turn off the two powers.
SignJet JS310 Series User's Manuals
- 50 -
Advertisement
Table of Contents
Need help?
Do you have a question about the SignJet JS310 Series and is the answer not in the manual?
Questions and answers