Table of Contents
Advertisement
3.
BID compensation:
BID compensation is set to eliminate the tolerance of ink jet in different directions. First adjust the BID
compensation in the control panel where you can adjust this value for all heads at same time (Check
it in VI Basic Panel Operation).
And here in software is to micro adjust BID compensation for each head solely.
The amount of BID compensation is different with different speed. So it is necessary to adjust this
parameter for each printing mode.
4.
Slope Compensation:
Adjust the compensation for the gradient arranged Print heads.
5.
Ignore X parameter, Ignore Y parameters:
Ignore all the setup parameters for printer status inspect. Never check these 2 options for printing.
6.
Feeding Compensate:
Used to adjust the feeding on the Y direction. The amount of feeding is different with different Pass.
So it is necessary to adjust this parameter for each printing mode.
Warning:
Do not change these values at will. It may cause printout overlapping or dimness.
SignJet JS310 Series User's Manuals
- 57 -
Advertisement
Table of Contents
