Xii.2 Maintenance Of Print Head; Xii.2.1 Moisturizing Of Print Head - GRAPHTEC SignJet JS310 Series User Manuals

XII.2 Maintenance of Print head
Always keep the surface of Print head wet with flush solution. If the printer is left unused, the Print head
must be dropped with flush solution and covered with fresh-keeping polyethylene films to keep it wet.
XII.2.1 Moisturizing of Print head:
If the printer is left unused for 1 day and above, do as below to keep the Print head wet.
1. Put a clean unwoven fabric on the sponge of wet keeping frame.
2. Drop some flush solution on the unwoven fabric.
3. Cover the wet-keeping frame the Print head.
If the printer is left unused for 2 days and above, do as below to keep the Print head wet.
1. Put a clean unwoven fabric on the sponge of wet keeping frame.
2. Drop some flush solution on the unwoven fabric.
3. Cover the wet-keeping frame the Print head.
4. Wrap the Print head unit with fresh-keeping polyethylene film.
SignJet JS310 Series User's Manuals
Drop some flush solution.
Cover the wet-keeping frame.
- 59 -
Cut an unwoven fabric,
and fold it.
Then put the unwoven
fabric on the sponge.