GRAPHTEC SignJet JS310 Series User Manuals page 28

SignJet JS310 Series User's Manuals
This function is used to adjust the scan
speed of the P/H carriage. The LCD
displays details as below:
Print Speed
Press ▲ or ▼ key to select from the 3
options.
High scan speed will reduce printing
quality.
Low scan speed will increase printing
quality but reduce printing speed. The
suggestion is Norm.
The LCD displays details similar to Print
speed. "Norm" flashes as the default
Feed Speed option.
Press ▲ or ▼ key to select from the 3
options. The suggestion is "Norm"
"XXXX" flashes on the LCD. Press ▲ or
▼ key to increase or reduce the value by
1.
Firing Vol.
This value is the firing volume of P/Hs for
auto spray (that means all nozzles are
unclogged).
3 options altogether are ready for flash
mode selection: 0, 1 and 2.
Flash Mode
Press or key to select from the 3 options.
- 27 -
MENU > 3 Print Speed
Norm
OFFLINE
0. stands for P/H does not flash
during printing;
1. stands for P/H flashes only once
during the whole printing;
2. stands for P/H flashes once every
forward and backward.