Table of Contents
Advertisement
Meaning of this dialogue box:
1.
Vertical parameters for Print head installation
Vertical parameter for all 4 colors should be set 0. The precision of the vertical position of the Print
heads ensures by mechanical manufacture and assembly.
2.
Horizontal parameter of Print head installation:
Adjust the head position and overlapping of four colors.
A.
Look head C1 as datum mark, its horizontal and vertical value is 0. The value is A (0, 0).
B.
The vertical gap between head C2 and head C1 is ensured by mechanical precision. The value
of horizontal gap is B. (In above figure is 170)
C. The vertical gap between head M1 and head C1 is 5 in above figure. The value of horizontal gap
is C. (In above figure is 510)
D. The vertical gap between head M2 and head C1 is ensured by mechanical precision. The value
of horizontal gap is D. (In above figure is 680)
E.
The vertical gap between head Y1 and head C1 is 0 in above figure. The value of horizontal gap
is E. (In above figure is 1020)
F.
The vertical gap between head Y2 and head C1 is ensured by mechanical precision. The value
of horizontal gap is F. (In above figure is 1190)
G. The vertical gap between head K1 and head C1 is 5 in above figure. The value of horizontal gap
is G. (In above figure is 1530)
H. The vertical gap between head K2 and head C1 is ensured by mechanical precision. The value
of horizontal gap is H. (In above figure is 1700)
SignJet JS310 Series User's Manuals
- 56 -
Advertisement
Table of Contents
