GRAPHTEC SignJet JS310 Series User Manuals page 19

Parts on the printer include:
1. Print head: 8 piezo Print heads
2. Chain: Hold and protect ink tubes
3. Printing Platform: Platform for printing
4. Power Switch: Turn on/off printer
5. Press Roller Control Pole: Control press roller up / down for media feeding
6. LCD Control Panel: Set up and execute function and mode
7. Heating board: Heat media to dry the ink on the media
8. Vacuum cleaner : Used to suck ink from Print head nozzles
9. Main Ink tanks: Total C, M, Y, K 4 colors, 1000ml/color
10. Media Auto-feeding sensor: Control media feeding motor running
11. Media feeding motor: Roller driver
12. Media Feeding Roller: Hold media for printing
13. 3-level switches for media take-up: Turn the switch up or down to guide the media take up back or
forth; turn the switch to middle to stop media take up
14. 3-level switches for media feeding: Turn the switch up or down to guide the media feeding back or
forth; turn the switch to middle to stop media feeding
15. Direction switch for Media feeding: Turn the switch up or down to guide direction of media feeding
for the media's rolling direction of print side.
16. Ink-solution 3-way valve: Guide ink while printing and guide flush solution while cleaning Print head
with solution
17. Solution valve: Close the solution during printing and guide solution to clean the Print heads with
solution.
18. Print Interface: USB2.0 interface
19. Power Socket: Provide power for printer
20. Heating Power Socket: Provide power for heater
21. Heater Protective switch: Prevent electric leakage of heating board
22. Ink pump: Provide ink to sub ink tank
23. Ink filter: Filtrate impurity in ink
24. Air filter: Filtrate impurity in the air
25. Air valve: Automatically control the air route
26. Air pump: Compress air as positive cleaning the Print head
27. Sub-tanks: Store ink
28. Safety tank: Store air. Prevent ink leak out while float switch inside sub ink tank is broken.
29. Tube Clip: manually control the air route
30. Solution button
31. Ink button: Control starting and process of positive pressure clean
32. Light: Lighten for checking the Print head status
33. Waste ink slot: collect waste ink in clean position
SignJet JS310 Series User's Manuals
- 18 -