Table of Contents
Advertisement
3.
Fixing Xaar Print head 126 on supporter.
Method:
Loosen Up and Left Screw, then remove Right Screw
Insert Xaar Print head 126 downwards
Put on Right Screw and tighten all three screws
Note:
After assembling the Print head, clip cirques prepared in spare parts tank on the plugs of
In and Out tube to prevent the plugs jumped out.
4.
Please connect all power cables correctly;
5.
Install Rip software on the computer.
SignJet JS310 Series User's Manuals
1.－ Up screw
2.－ Left screw
3.－ Right screw
Figure 3-3 Print head frame
- 12 -
1
2
3
Advertisement
Table of Contents
Need help?
Do you have a question about the SignJet JS310 Series and is the answer not in the manual?
Questions and answers