GRAPHTEC SignJet JS310 Series User Manuals page 29

Application
SignJet JS310 Series User's Manuals
PH Volt. Set
UV Lamp Power
Front Heater
- 28 -
This function is used to set Voltage of
P/Hs. The LCD displays details as below:
MENU > PH 1 Voltage
PH 2 Voltage
PH 3 Voltage
OFFLINE PH 4 Voltage
Here press ▲ and ▼ key to scroll the
submenu. The LCD will display values as
below:
MENU > 1 PH 1 Voltage
0099
0182
OFFLINE
The upper number is adjustable EF value
of P/H and the down number indicates
voltage value of P/H.
Press ◄ or ► to move the cursor position
over the number string and press ▲ or ▼
key to increase or reduce the flashing
number of EF value.
The 8 P/Hs setup from 1 to 8:
PH 1 Voltage for P/H C1;
PH 2 Voltage for P/H C2;
...
PH 8 Voltage for P/H K2.
No operation
"45" flashes on the LCD as default setting
at the unit of centigrade degrees. Press ▲
or ▼ key to increase or reduce the value
of temperature.
For normal condition, keep the default
value.