Accessories - DKS 1834 PC Programmable Installation & Owner's Manual

6.2 Accessories

Surface Mount Recess Kit
Use to recess a surface mount unit into a wall or column. P/N 1803-150.
Flush Mount Kit
Use to install flush style units into a wall or column. Kit includes rough-in back box and trim-ring. P/N 1814-165 comes with
stainless steel trim ring. P/N 1814-166 comes with gold plated trim ring.
Flush Mount Surface Mounting Kit
Use to surface mount a flush style unit. P/N 1814-152.
Stainless Steel Case
Replaces the black steel surface mount case with a stainless steel case. P/N 1810-102.
Surge Suppressors
Phone line suppressor. P/N 1878-010.
Low voltage (28 V) suppressor. P/N 1878-010.
High voltage (115 V) suppressor. P/N 1879-080.
Mounting Posts
Heavy-duty goose-neck mounting post with mounting plate. P/N 1200-038.
Heavy-duty goose-neck mounting post with concrete base plate for pad mounting. P/N 1200-037.
Designer Style mounting posts; offset P/N 1200-086, straight P/N 1200-085.
Self-standing Kiosk, for flush mount units only; P/N 1200-170.
RS-232 Cable
RS-232 cable with DB-9 connector on one end and wires on the other end. Use this cable to program the entry system from a
PC using RS-232 communications instead of the modem. P/N 1818-040.
TCP/IP Converter Kit
Enables the 1830 series system to send and receive data via the DKS Internet Server or a LAN. P/N 1830-175.
RS-422 Adapter Kit
Enables the 1830 series system to send and receive data to a PC. P/N 1840-055.
Wireless Adapter
Enables the 1830 series system to send and receive only data (no voice communication) to a PC without a cable connection.
P/N 1815-510 - 1 Remote, 1815-511 - 2 Remotes, 1815-512 - 3 Remotes.
Yagi High-Gain Antenna
Use with the wireless adapter to send and receive data much farther to a PC than the wireless adapter's antenna. P/N 1815-741.
Telephone Test Set
Includes clips, cord and carrying case. P/N 1800-050.
Battery
12 volt .8 amp hour gel cell provides stand by power during power interruptions. P/N 1801-008.
50 1834-065-B-10-14