Section 7 - Log Tables; Programming Information Tables - DKS 1834 PC Programmable Installation & Owner's Manual

Complete the information in the tables on the following pages to maintain a record of the information that has been
programmed into the telephone entry system if the system IS NOT being programmed from a PC. If PC programming is being
utilized, there is no reason to maintain these log sheets since the PC will maintain a complete record of the information that has
been programmed.
Make copies of the resident log sheet (pages 65 and 66) so that you have enough to complete a listing of all residents and data.
Enter the information as shown in the example below.
AAC stands for Alternate Area Code. Enter the alternate area code number if alternate area codes have been programmed and
assigned to this resident (section 3.5.3).
DIRECTORY CODE is the resident's unique directory code. It can be 1 to 4 digits (section 3.5.1).
ENTRY CODE is the resident's four-digit entry code (section 3.7.1) if they are used.
DEVICE CODE is the resident's unique device code (section 3.6.1) if access control devices (Transmitters, cards, etc.) are used.
Resident Log Sheet Example
Name
Smith, John

7.1 Programming Information Tables

Master Code (section 3.2.1)
1st Digit 2nd Digit
Tone Open Numbers
Momentary Activation
Relay Hold OPEN
Relay RELEASE
Relay Hold OPEN 1 Hour
Low Boundary
High Boundary
Postal Lock Activates (section 3.3.4)
Relay 1
7.1.1 10 Area Codes
Pointer Area Code
1
2
52

SECTION 7 - LOG TABLES

AAC
3
3rd Digit 4th Digit
(section 3.3.3)
Entry Code Ranges
(section 3.6.3)
Relay 2
Area Code Pointers - System Set to 10 Area Codes (section 3.5.3)
Pointer Area Code
3
4
PHONE NUMBER
765-0000
Relay 1
Relay 1
Pointer Area Code Pointer
5
6
DIRECTORY CODE ENTRY CODE
173 3812
Relay Strike Time (section 3.3.1)
Relay 1
Relay 2
Relay 2
Rotary "9" Activates (section 3.3.6)
Relay 1
Area Code Pointer
7
8
DEVICE CODE
04231
Relay 2
Relay 2
Area Code
9
0
1834-065-B-10-14