Accessories - DKS 1803 Owner's Manual

SYMPTON
Four-digit entry codes
will not work.
Five-digit entry codes
will not work.
Entry codes will not
activate relay 1.
Entry codes will not
activate relay 2.
System emits a beep
every 30 seconds.
LCD is unreadable
(1802, 1803, 1810
units only).
5.3

Accessories

Surface Trim Ring
Flush Kit
Flush Ring
Stainless Steel Case
Surge Suppressers
Mounting Post
Telephone Test Set
Battery
1800-060-S-3-14
POSSIBLE SOLUTION(S)

Forgetting to press # first.

Entry code is time zone restricted. Reprogram time zone or turn time zone off
(5.2.4).

Entry code attempted was a flash code that is no longer valid.

Forgetting to press ## first.

Entry code is time zone restricted. Reprogram time zone or turn time zone off
(5.2.4).

Programmed entry codes are greater than the divide number.
divide number or program entry codes less than the divide number.

Programmed entry codes are less than or equal to the divide number.
Reprogram divide number or program entry codes greater than the divide
number

Master code switch is in the ON position.

Adjust contrast.
Use to recess surface mount 1803 or 1810 units into a wall or column.
P/N 1803-150.
Use to install flush style 1803 or 1810 units into a wall or column. Kit
includes rough in back box and trim ring. P/N 1814-165 comes with
stainless steel trim ring. P/N 1814-166 comes with gold plated trim ring.
Use to surface mount a flush style 1803 or 1810 unit. P/N 1814-152.
Replaces the black steel surface mount case on the 1803 and 1810 units
with a stainless steel case. P/N 1810-102.
High voltage (120 V) suppresser: P/N 1878-076.
Phone line suppresser: P/N 1878-077.
Low voltage (28 V) suppresser: P/N 1878-078.
Standard gooseneck mounting post: P/N 1200-045.
Standard gooseneck mounting post – long: P/N 1200-046
Heavy-duty Architectural Style mounting post: P/N 1200-037.
Heavy-duty Architectural Style mounting post – Long: P/N 1200-038.
Includes clips, cord and carrying case. P/N 1800-050.
12 volt .8 amp hour gel cell provides stand by power during power
interruptions. P/N 1801-008.
Reprogram
Page 49