HEATER AND AIR CONDITIONING 1A-75
283-327 V-8
CHEVROLET, CHEVELLE AND CAMARO
396-427 V-8
CHEVROLET AND CHEVELLE
283-327 V-8
CHEVY II
Fig. Ill—Compressor Mount—V-8 Engines
COMFORTRON HEATER COMPONENTS
Heater Core
Removal
1. Remove the core case as previously described under
Heater and Air Distributor Assembly.
2. Remove the screws attaching the die cast plate to
the air inlet side of the case. Disconnect the tem-
perature door linkage at the door shaft.
3. Remove the die cast plate with core from the case.
Remove the core mounting screws and remove core.
Installation
1. Seal the core to the cast plate with non-hardening
sealer and attach the core with the mounting straps
and screws.
2. Install the plate to the case and connect the tem-
perature door linkage.
CHEVROLET CHASSIS SERVICE MANUAL