CORVETTE BODY 1B-50
WIRE-ON
BINDING
EXCESS
MATERIAL!
Fig. 109—Installing Binding
\
L
SECTION B-B
SECTION A-A
Fig. 110—Top Frame and Linkage
install screws. If necessary, proceed as outlined
under Top Adjustments.
TOP TRIM AND REAR WINDOW ASSEMBLY
The following information deals with removal and
installation of the folding top trim and window assembly
complete. Figure 102 may be referred to for parts
identifications. Lettered sections (i.e. Section A-A) re-
ferred to in the instructions may also be found in Figure
102. Note that the sections are illustrated as they would
CHEVROLET CHASSIS SERVICE MANUAL