Ip Relay Settings; Parameters; Specifying The Settings - Konica Minolta bizhub C200 Network Administration Manual

2
2.3.9

IP Relay Settings

Parameters

Parameter
IP Relay Destination
Registration
Relay Result Port
!
Detail
In order to specify SMTP authentication settings for registering relay stations, the software switch
settings must be specified. For details, refer to "Specifying security settings for e-mail transmissions
(mode 380)" on page 3-14.
If SMTP authentication settings for SMTP reception have been specified on the relay station for the IP
relay operation, SMTP authentication settings must be specified on the machine sending the fax when
the relay station is registered.

Specifying the settings

1
In the Network Settings screen, touch [IP Relay Settings].
2
Touch [IP Relay Destination Registration].
3
Touch the button for the number where the relay station is to be registered.
2-30
Description
Register the address of IP relay stations.
Enter the domain name specified for "Self-Domain Name" on the relay station when limit-
ing reception according to the domain name during IP relay operations.
Specify the number of the port receiving communication results for IP relay operations.
Specifying network settings
bizhub C200