Specifying network settings
8
Touch [1].
–
For multiple exception settings, settings can be specified for Exception Setting "2" and "3".
9
Use the keypad to type in the starting and ending IP addresses, and then touch [OK].
–
The IP address cannot be specified to begin with "0.", "127.", or a number greater than "224".
–
To enter a number with less than 3 digits, touch
10
Touching [OK] displays the following screen. To apply the new settings, turn the machine off, then on
again.
!
Detail
In order to specify SMTP authentication settings, the software switch settings must be specified. For
details, refer to "Specifying security settings for e-mail receptions (mode 383)" on page 3-15.
bizhub C200
to move the cursor to the next number.
2
2-19