Specifying The Settings - Konica Minolta bizhub C200 Network Administration Manual

Specifying network settings

Specifying the settings

1
In the Network Settings screen, touch [SMTP RX Settings].
2
Touch [Self-Domain Name].
3
Type in the domain name of the machine, and then touch [OK].
– To change the port number, touch [Port], and then use the keypad to type in the desired port
number.
4
Touching [OK] displays the following screen. To apply the new settings, turn the machine off, then on
again.
Reminder
When turning the machine off, then on again, wait about 10 seconds to turn the machine on after turning
it off. The machine may not operate correctly if it is turned on immediately after being turned off.
bizhub C200
2
2-17