Specifying machine functions (software switch settings)
3.5
Scanning/faxing settings
The software switch settings related to scanning/faxing are described below.
Note
For details on the Fax/Scan mode operations, refer to the User manual – Network Scan/Fax/Network
Fax Operations.
3.5.1
Specifying settings concerning the position of the transmission source information
and concerning password communications (mode 000)
Specify the location where the transmission source information is to be added.
Factory settings
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits
Description
7-5
-
4
Specify where the transmission source name is added to a
transmitted original.
3-0
-
3.5.2
Specifying settings for inserting the destination in the original (mode 001)
Specify how the recipient name is added to original.
Factory settings
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits
Description
7-1
-
0
Specify whether or not the recipient name is added to trans-
mitted original.
bizhub C200
7654 3210
0011 0000 (HEX: 30)
7654 3210
0000 0000 (HEX: 00)
Settings
Details
001
*Do not change the settings
for these bits.
0
Outside of the original
1
Inside the original
0000
*Do not change the settings
for these bits.
Settings
Details
0000000
*Do not change the settings
for these bits.
0
Is not added
1
Is added
3
3-17