3
3.4.8
Specifying security settings for e-mail transmissions (mode 380)
Specify the security settings for e-mail transmissions.
Factory settings
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits
Description
7
Specify whether or not mail reception authentication (APOP
authentication) is used.
6
Specify whether or not mail transmission authentication
(SMTP authentication) is used.
5
Specify whether or not mail transmission authentication
(CRAM-MD5 authentication) is used.
4
Specify whether or not mail transmission authentication
(LOGIN authentication) is used.
3
Specify whether or not mail transmission authentication
(PLAIN authentication) is used.
2
Specify whether or not the SMTP authentication ID and
password are shared with the POP3 user name and pass-
word.
1
-
0
Specify whether or not the SSL protocol is used.
SMTP authentication is enabled when the following conditions are met.
-
Bit 6 of mode 380 is set to "1".
-
When the SMTP authentication user name and password are shared with the POP3 user name and
password, bit 2 of mode 380 is set to "0".
-
When the SMTP authentication user name and password are not shared with the POP3 user name and
password, bit 2 of mode 380 is set to "1", and settings for "SMTP Authentication User Name" and
"SMTP Authentication Password" in the Network Settings screen are specified.
-
Bit 5, 4 or 3 of mode 380 is set to "1".
!
Detail
For details on specifying SMTP authentication settings for e-mail transmissions, refer to "SMTP TX
Settings" on page 2-13.
If all e-mail authentication methods are enabled (bits 5, 4 and 3 of mode 380 are set to "1"), they will
have the following priority: CRAM-MD5 authentication (bit 5) % LOGIN authentication (bit 4) % PLAIN
authentication (bit 3).
3-14
Specifying machine functions (software switch settings)
7654 3210
0011 1010 (HEX: 3A)
Settings
Details
0
Not used
1
Used
0
Not used
1
Used
0
Not used
1
Used
0
Not used
1
Used
0
Not used
1
Used
0
The ID and password are
shared.
1
The ID and password are
not shared.
1
*Do not change the setting
for this bit.
0
Not used
1
Used
bizhub C200