When Smtp Authentication Is Used - Konica Minolta bizhub C200 Network Administration Manual

Specifying network settings

When SMTP authentication is used

1
In the Network Settings screen, touch [IP Relay Settings].
2
Touch [IP Relay Destination Registration].
3
Touch the button for the number where the relay station is to be registered.
4
Touch [SMTP Authentication User Name].
5
Type in the SMTP authentication user name, and then touch [OK].
6
Touch [SMTP Authentication Password].
7
Touch [New Password], type in the SMTP authentication password, and then touch [OK].
8
Touch [Confirm New Password], type in the SMTP authentication password again, and then touch [OK].
9
Touch [OK] in each screen until the initial screen appears.
bizhub C200
2
2-33