Specifying machine functions (software switch settings)
3.5.12
Specifying settings for general subscriber lines (mode 043)
Specify the calling method for the general subscriber line.
Factory settings
Factory settings
Bits
Settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
Bits
Description
7-2
-
1
Specify the calling method for the general subscriber line.
0
-
Note
Bit 1 is available only if the optional fax multi line kit has been installed.
bizhub C200
7654 3210
1000 0011 (HEX: 83)
Settings
Details
100000
*Do not change the settings
for these bits.
0
Calls from the specified line
(port 1 or 2), based on the
operation and registration
settings.
1
Calls from the available line
(port 1 or 2), regardless of
the operation and registra-
tion settings.
1
*Do not change the setting
for this bit.
3
3-25