Konica Minolta bizhub C200 Network Administration Manual page 89

Specifying machine functions (software switch settings)
Compared item and the setting for the number of digits compared in the CSI signal
(Example: When the number of digits to be compared in the CSI signal is set to 6 and a 10-digit CSI signal is
received)
Compared item
Recipient's telephone number
Comparison number
bizhub C200
Comparison relationship
When the recipient's telephone
number has more digits than the
number of digits to be compared
from the CSI signal
When the recipient's telephone
number has less digits than the
number of digits to be compared
from the CSI signal
When the comparison number has
less digits than the number of digits
in the CSI signal
When the comparison number has
more digits than the number of digits
in the CSI signal
Operation
The comparison is performed ac-
cording to the setting for the number
of digits compared in the CSI signal.
(With a 10-digit called number, digit
6 from the end is compared.)
The comparison is performed only
with the number of digits in the called
number. (With a 4-digit called
number, digit 4 from the end is com-
pared.)
The comparison is performed only
with the number of digits in the com-
parison number. (With a 10-digit
comparison number, digit 10 from
the end is compared.)
The comparison is performed only
with the number of digits in the com-
parison number. (With a comparison
number of 11 or more digits, digit 11
from the end is compared. However,
since the CSI signal contains only 10
digits, it will not match, resulting in a
transmission error.)
3
3-39